Health and Fitness Belts
Conveyor Belts – Lightweight
Our treadmill belts are a sound choice. Using our Technical Center resources and state-of-the-art sound equipment, we measure belt noise to ensure our treadmill belts offer the ultimate in quiet performance. They are available in a variety of impressions to simulate multiple surfaces. Impressions include Inverted Oval, Quad and Tygrip.
Below are some examples of Health and Fitness belts. Many other combinations of covers, profiles, colors and fabric carcasses can be produced. Please contact us for more information.
DOWNLOAD BROCHURE
Distributor Locator
Health and Fitness Belts
Belts for Health and Fitness Conveying
PVAZ 40T18 OLb
The single-ply cross rigid construction will allow very small pulleys and low HP for operation of this belt in treadmill applications.
PVAZ 40T18 OLb
The single-ply cross rigid construction will allow very small pulleys and low HP for operation of this belt in treadmill applications.
Technical Data:
| Attributes | Imperial | Metric |
|---|---|---|
| Working Tension | 40 piw | 7.0 KN/M |
| Number Of Plies | 1 | 1 |
| Fabric Type | Multi x Mono | Multi x Mono |
| Top Surface | Oval | Oval |
| Bottom Surface | Low Friction | Low Friction |
| Overall Gauge (Approximate) | 0.050 in. | 1.27 mm |
| Weight (Approximate) | 0.268 lbs/sq.ft. | 1.31 kg/sq.m. |
| Bottom Coefficient Of Friction | 0.20 (approx.) | 0.20 (approx.) |
| Minimum Rec. Pulley Diameters | 1.0 in. | 25 mm |
| Elongation At Rated Tension | < 2% | < 2% |
| Working Temperature | 20° to 180°F | -7° to 82°C |
Splicing Methods:
- FOF: N/A
- Finger: Yes
- Bias Stepped: N/A
- Skived Bias: N/A
- Clipper*: N/A
- Alligator*: N/A
- Staple*: N/A
* Fastener manufacturer should be consulted to review belt and application information.
Compliance (Government Regulations):
- FDA/USDA: No
- OSHA (< 300 Megohms): No
- MSHA (CFR 18.65): No
- CSA (M422-87): No
- FRAS (1334.12): No
- NCB (158:1989): No
No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.
DOWNLOAD DATA SHEET
PVAZ 40T18 QLb
The single-ply cross rigid construction will allow very small pulleys and low HP for operation of this belt in treadmill applications.
PVAZ 40T18 QLb
The single-ply cross rigid construction will allow very small pulleys and low HP for operation of this belt in treadmill applications.
Technical Data:
| Attributes | Imperial | Metric |
|---|---|---|
| Working Tension | 40 piw | 7.0 KN/M |
| Number Of Plies | 1 | 1 |
| Fabric Type | Multi x Mono | Multi x Mono |
| Top Surface | Quadgrip | Quadgrip |
| Bottom Surface | Low Friction | Low Friction |
| Overall Gauge (Approximate) | 0.050 in. | 1.27 mm |
| Weight (Approximate) | 0.289 lbs/sq.ft. | 1.41 kg/sq.m. |
| Bottom Coefficient Of Friction | 0.20 (approx.) | 0.20 (approx.) |
| Minimum Rec. Pulley Diameters | 1.0 in. | 25 mm |
| Elongation At Rated Tension | < 2% | < 2% |
| Working Temperature | 20° to 180°F | -7° to 82°C |
Splicing Methods:
- FOF: N/A
- Finger: Yes
- Bias Stepped: N/A
- Skived Bias: N/A
- Clipper*: N/A
- Alligator*: N/A
- Staple*: N/A
* Fastener manufacturer should be consulted to review belt and application information.
Compliance (Government Regulations):
- FDA/USDA: No
- OSHA (< 300 Megohms): No
- MSHA (CFR 18.65): No
- CSA (M422-87): No
- FRAS (1334.12): No
- NCB (158:1989): No
No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.
DOWNLOAD DATA SHEET
PVAZ 40T21 OLb
The single-ply cross rigid, antistatic construction will allow very small pulleys and low HP for operation of this belt in treadmill applications.
PVAZ 40T21 OLb
The single-ply cross rigid, antistatic construction will allow very small pulleys and low HP for operation of this belt in treadmill applications. Its unique twill weave pattern creates a very quiet belt.
Technical Data:
| Attributes | Imperial | Metric |
|---|---|---|
| Working Tension | 40 piw | 7.0 KN/M |
| Number Of Plies | 1 | 1 |
| Fabric Type | Multi x Mono | Multi x Mono |
| Top Surface | Oval | Oval |
| Bottom Surface | Low Friction | Low Friction |
| Overall Gauge (Approximate) | 0.050 in. | 1.27 mm |
| Weight (Approximate) | 0.268 lbs/sq.ft. | 1.31 kg/sq.m. |
| Bottom Coefficient Of Friction | 0.20 (approx.) | 0.20 (approx.) |
| Minimum Rec. Pulley Diameters | 1.0 in. | 25 mm |
| Elongation At Rated Tension | < 2% | < 2% |
| Working Temperature | 20° to 180°F | -7° to 82°C |
Splicing Methods:
- FOF: N/A
- Finger: Yes
- Bias Stepped: N/A
- Skived Bias: N/A
- Clipper*: N/A
- Alligator*: N/A
- Staple*: N/A
* Fastener manufacturer should be consulted to review belt and application information.
Compliance (Government Regulations):
- FDA/USDA: No
- OSHA (< 300 Megohms): No
- MSHA (CFR 18.65): No
- CSA (M422-87): No
- FRAS (1334.12): No
- NCB (158:1989): No
No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.
DOWNLOAD DATA SHEET
PVAZ 40T21 QLb
The single-ply cross rigid, antistatic construction will allow very small pulleys and low HP for operation of this belt in treadmill applications.
PVAZ 40T21 QLb
The single-ply cross rigid, antistatic construction will allow very small pulleys and low HP for operation of this belt in treadmill applications. Its unique twill weave pattern creates a very quiet belt.
Technical Data:
| Attributes | Imperial | Metric |
|---|---|---|
| Working Tension | 40 piw | 7.0 KN/M |
| Number Of Plies | 1 | 1 |
| Fabric Type | Multi x Mono | Multi x Mono |
| Top Surface | Quadgrip | Quadgrip |
| Bottom Surface | Low Friction | Low Friction |
| Overall Gauge (Approximate) | 0.050 in. | 1.27 mm |
| Weight (Approximate) | 0.289 lbs/sq.ft. | 1.41 kg/sq.m. |
| Bottom Coefficient Of Friction | 0.20 (approx.) | 0.20 (approx.) |
| Minimum Rec. Pulley Diameters | 1.0 in. | 25 mm |
| Elongation At Rated Tension | < 2% | < 2% |
| Working Temperature | 20° to 180°F | -7° to 82°C |
Splicing Methods:
- FOF: N/A
- Finger: Yes
- Bias Stepped: N/A
- Skived Bias: N/A
- Clipper*: N/A
- Alligator*: N/A
- Staple*: N/A
* Fastener manufacturer should be consulted to review belt and application information.
Compliance (Government Regulations):
- FDA/USDA: No
- OSHA (< 300 Megohms): No
- MSHA (CFR 18.65): No
- CSA (M422-87): No
- FRAS (1334.12): No
- NCB (158:1989): No
No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.
DOWNLOAD DATA SHEET
PVAZ 60T19P OLb
Oval impression, anti-static performance and precision tracking make this construction ideal for treadmill and other light-duty applications.
PVAZ 60T19P OLb
Oval impression, anti-static performance and precision tracking make this construction ideal for treadmill and other light-duty applications. The thin 2-ply specially designed cross rigid construction allows very small pulleys, low noise, and low HP for operation of this belt.
Technical Data:
| Attributes | Imperial | Metric |
|---|---|---|
| Working Tension | 60 piw | 11 KN/M |
| Number Of Plies | 2% | 2% |
| Fabric Type | Multi x Mono | Multi x Mono |
| Top Surface | Oval | Oval |
| Bottom Surface | Low Friction | Low Friction |
| Overall Gauge (Approximate) | 0.080 in. | 2.0 mm |
| Weight (Approximate) | 0.5 lbs/sq.ft. | 2.4 kg/sq.m. |
| Bottom Coefficient Of Friction | 0.20 (approx.) | 0.20 (approx.) |
| Minimum Rec. Pulley Diameters | 1.0 in. | 25 mm |
| Elongation At Rated Tension | < 2% | < 2% |
| Working Temperature | 20° to 180°F | -7° to 82°C |
Splicing Methods:
- FOF: Yes
- Finger: Yes
- Bias Stepped: Yes
- Skived Bias: Yes
- Clipper*: UCM36SLSP
- Alligator*: 1
- Staple*: 62
* Fastener manufacturer should be consulted to review belt and application information.
Compliance (Government Regulations):
- FDA/USDA: No
- OSHA (< 300 Megohms): No
- MSHA (CFR 18.65): No
- CSA (M422-87): No
- FRAS (1334.12): No
- NCB (158:1989): No
No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.
DOWNLOAD DATA SHEET
PVAZ 60T19P TLb-S
Tygrip (Tyler wire) impression, anti-static performance, ultra-quiet fabric design, and precision tracking make this construction ideal for treadmill and a wide variety of other light-duty applications.
PVAZ 60T19P TLb-S
Tygrip (Tyler wire) impression, anti-static performance, ultra-quiet fabric design, and precision tracking make this construction ideal for treadmill and a wide variety of other light-duty applications. The thin 2-ply, cross rigid construction allows very small pulleys and low HP for operation of this belt.
Technical Data:
| Attributes | Imperial | Metric |
|---|---|---|
| Working Tension | 60 piw | 11 KN/M |
| Number Of Plies | 2% | 2% |
| Fabric Type | Top: Multi x Mono
Bottom: Multi x Multi |
Top: Multi x Mono
Bottom: Multi x Multi |
| Top Surface | Tygrip | Tygrip |
| Bottom Surface | Low Friction | Low Friction |
| Overall Gauge (Approximate) | 0.097 in. | 2.5 mm |
| Weight (Approximate) | 0.58 lbs/sq.ft. | 2.84 kg/sq.m. |
| Bottom Coefficient Of Friction | 0.20 (approx.) | 0.20 (approx.) |
| Minimum Rec. Pulley Diameters | 1.0 in. | 25 mm |
| Elongation At Rated Tension | < 2% | < 2% |
| Working Temperature | 20° to 180°F | -7° to 82°C |
Splicing Methods:
- FOF: Yes
- Finger: Yes
- Bias Stepped: Yes
- Skived Bias: Yes
- Clipper*: UCM36SLSP
- Alligator*: 1
- Staple*: 62
* Fastener manufacturer should be consulted to review belt and application information.
Compliance (Government Regulations):
- FDA/USDA: No
- OSHA (< 300 Megohms): No
- MSHA (CFR 18.65): No
- CSA (M422-87): No
- FRAS (1334.12): No
- NCB (158:1989): No
No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.
DOWNLOAD DATA SHEET
PVAZ 60T21P OLb
Oval impression, anti-static performance and precision tracking make this construction ideal for treadmill and other light-duty applications.
PVAZ 60T21P OLb
Oval impression, anti-static performance and precision tracking make this construction ideal for treadmill and other light-duty applications. The thin 2-ply specially designed cross rigid construction allows very small pulleys, low noise, and low HP for operation of this belt. Twill weave fabric creates a superior quiet belt.
Technical Data:
| Attributes | Imperial | Metric |
|---|---|---|
| Working Tension | 60 piw | 11 KN/M |
| Number Of Plies | 2 | 2 |
| Fabric Type | Multi x Mono | Multi x Mono |
| Top Surface | Oval | Oval |
| Bottom Surface | Low Friction | Low Friction |
| Overall Gauge (Approximate) | 0.080 in. | 2.0 mm |
| Weight (Approximate) | 0.5 lbs/sq.ft. | 2.4 kg/sq.m. |
| Bottom Coefficient Of Friction | 0.20 (approx.) | 0.20 (approx.) |
| Minimum Rec. Pulley Diameters | 1.0 in. | 25 mm |
| Elongation At Rated Tension | < 2% | < 2% |
| Working Temperature | 20° to 180°F | -7° to 82°C |
Splicing Methods:
- FOF: Yes
- Finger: Yes
- Bias Stepped: Yes
- Skived Bias: Yes
- Clipper*: UCM36SLSP
- Alligator*: 1
- Staple*: 62
* Fastener manufacturer should be consulted to review belt and application information.
Compliance (Government Regulations):
- FDA/USDA: No
- OSHA (< 300 Megohms): No
- MSHA (CFR 18.65): No
- CSA (M422-87): No
- FRAS (1334.12): No
- NCB (158:1989): No
No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.
DOWNLOAD DATA SHEET
PVAZ 60T21P TLb-S
Tygrip (Tyler wire) impression, anti-static performance, ultra-quiet fabric design and precision tracking make this construction ideal for treadmill and a wide variety of other light-duty applications.
PVAZ 60T21P TLb-S
Tygrip (Tyler wire) impression, anti-static performance, ultra-quiet fabric design and precision tracking make this construction ideal for treadmill and a wide variety of other light-duty applications. The thin 2-ply, cross rigid construction allows very small pulleys and low HP for operation of this belt. Twill weave fabric creates a superior quiet belt.
Technical Data:
| Attributes | Imperial | Metric |
|---|---|---|
| Working Tension | 60 piw | 11 KN/M |
| Number Of Plies | 2% | 2% |
| Fabric Type | Multi x Mono | Multi x Mono |
| Top Surface | Tygrip | Tygrip |
| Bottom Surface | Low Friction | Low Friction |
| Overall Gauge (Approximate) | 0.092 in. | 2.3 mm |
| Weight (Approximate) | 0.55 lbs/sq.ft. | 2.69 kg/sq.m. |
| Bottom Coefficient Of Friction | 0.20 (approx.) | 0.20 (approx.) |
| Minimum Rec. Pulley Diameters | 1.0 in. | 25 mm |
| Elongation At Rated Tension | < 2% | < 2% |
| Working Temperature | 20° to 180°F | -7° to 82°C |
Splicing Methods:
- FOF: Yes
- Finger: Yes
- Bias Stepped: Yes
- Skived Bias: Yes
- Clipper*: UCM36SLSP
- Alligator*: 1
- Staple*: 62
* Fastener manufacturer should be consulted to review belt and application information.
Compliance (Government Regulations):
- FDA/USDA: No
- OSHA (< 300 Megohms): No
- MSHA (CFR 18.65): No
- CSA (M422-87): No
- FRAS (1334.12): No
- NCB (158:1989): No
No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product. The information on this specification sheet supercedes all previously printed material.